INSTALLATION
10
Install the Blind
Attach Valance Clips
With fully recessed inside mounts or ceiling mounts, the valance clips must be installed before
mounting the headrail.
■
Attach valance clips 2"
from each end of the
headrail.
■
Space additional clip(s)
evenly between the two
end clips so that the
valance clips are no more
than 36" apart.
■
Do not place the valance clips where they could interfere with any working parts.
■
If desired, the valance may be positioned
1
/
4
" higher by raising the clips one notch up, as
shown in the illustration above.
Mount the Headrail
■
Tilt the headrail so that its back lip slides under the front lip of the end brackets and
intermediate bracket(s).
■
Push the headrail against the back of the end brackets.
■
Check that the front lip of the intermediate bracket(s) is under the front lip of the headrail.
Standard
Position
Raised Clip =
Higher Valance
End Bracket
Intermediate Bracket
