INSTALLATION
5
Mount the Installation Brackets — Inside Mount and Ceiling Mount
Attach End Brackets
With inside mounts or ceiling mounts, attach the two end brackets flush against the sides of the
window casement or to the ceiling. (See the outside mount section for positioning the brackets
for ceiling mounting.) Choose the most appropriate of the following mounting methods:
■
Inside mount only:
Mount the end brackets with one screw through a side hole and one
screw through a top hole, as shown below left.
■
Inside mount only:
Mount the end brackets with two screws through diagonal side holes.
■
Inside mount or ceiling mount:
Top mount the end brackets with screws through the two
top holes, as shown below right.
■
Ceiling mount only:
If the brackets are flush with the back wall, attach them with one
screw through a top hole and one through a rear hole.
■
Use a
3
/
32
" drill bit to drill holes for the mounting screws.
Important:
Use drywall anchors when mounting into drywall.
■
Attach the end brackets using the screws provided.
Important:
The front edges of the brackets must be level and aligned to each other.
Side/Top
Mount
Top Mount
