OPERATION
28
To Delete a Transmitter:
■
Press the PROGRAM button on an already recorded channel you will keep on the remote
until the shade jogs.
■
Select the transmitter and channel to delete.
■
Press the PROGRAM button on the remote until the shade jogs, then release the button.
IMPORTANT:
Each channel needs to be deleted individually.
Remote Control Reference
More information on the hand held remote control is available at: www.somfy.com
Shade Adjustment
■
Lower the shade completely.
■
Raise the shade and watch how the fabric winds on the roll.
IMPORTANT:
Level mounting is essential for proper operation.
➤
If the fabric winds unevenly and begins to telescope to one side, check to ensure the
shade is level.
➤
If the shade is not level, remove the shade from the brackets and shim (ceiling or inside
mounts), or adjust the position of the installation bracket by using the adjustment
allowance provided by the slots in the installation brackets.
IMPORTANT:
If the shade was unrolled before being installed, it may not raise and lower
to the right points. To correct this:
➤
Remove the shade from the installation brackets. See “Removing the Shade” on page
32.
➤
Roll the shade up until the bottom rail of the shade is even with the fabric roll.
➤
Re-install the shade.
