INSTALLATION
6
Mount the Installation Brackets — Inside Mount for Cassette Shades
Installation Brackets for Cassette Shades.
The number of installation brackets required
varies depending on the shade width, as shown in the table.
■
Mark 4" in from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■
Center the brackets on your marks and mark the screw holes.
➤
The minimum depth required for mounting is 2¼". Fully
recessed mounting requires 4¼" for the cassette to be flush
with the front of the window opening.
■
Drill the screw holes with a
3
∕
32
" drill bit.
■
Use a level to check that the mounting surface is level. Shim the
brackets, if necessary.
■
Attach the installation brackets using the screws provided.
IMPORTANT:
The front edges of the installation brackets must
be level and aligned to each other.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
Proceed to “Install the Shade” on page 8.
Cassette
Installation
Bracket
Shade
Width
Brackets
Required
Up to 36"
2
36
1
/
8
" – 72"
3
72
1
/
8
" – 90"
4
90
1
/
8
" – 120"
5
Installation Brackets
Jamb
Jamb
Space Evenly
Space Evenly
4"
4"
4"
Inside Mount
Summary of Contents for Alustra Woven Textures
Page 19: ......
