INSTALLATION
7
Mount the Installation Brackets — Outside Mount for Cassette Shades
Installation Brackets for Cassette Shades.
The number of installation brackets required
varies depending on the shade width, as shown in the table.
■
Center the cassette over the window opening at the desired height. Use a pencil to lightly
mark each end of the cassette.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark 4" in from each end of the cassette.
➤
If more than two installation brackets came with your
order, space additional bracket(s) evenly between the
two end brackets and mark their location. Mount into
wood whenever possible.
■
Center the brackets on your marks and mark the
screw holes.
➤
A minimum 4" flat vertical surface is required to
mount the brackets.
➤
The top of the installation brackets should be at the desired height. The brackets should
be level and aligned.
■
Drill the screw holes with a
3
∕
32
" drill bit.
■
Use a level to check that the mounting surface is level. Shim the brackets, if necessary.
■
Attach the installation brackets using the screws provided.
IMPORTANT:
The front edges of the installation brackets must be level and aligned to
each other.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
Cassette
Installation
Bracket
Shade
Width
Brackets
Required
Up to 36"
2
36
1
/
8
" – 72"
3
72
1
/
8
" – 90"
4
90
1
/
8
" – 120"
5
Cassette End Marks
Window Opening
Space Evenly
Space Evenly
4"
4"
4"
Outside Mount
Summary of Contents for Alustra Woven Textures
Page 19: ......