INSTALLATION
11
Attach the Valance Fabric (If Applicable)
■
Center the valance fabric in front of the valance headboard. Press the strip of hook-and-
loop material on the fabric to the hook-and-loop material on the front of the headboard.
➤
Be sure the top of the valance fabric is aligned and level with the top of the valance
headboard.
➤
If necessary, adjust the placement of the valance fabric by carefully peeling the top from
its hook-and-loop attachment and repositioning it.
➤
For valances with only one return, attach the fabric to the return side first.
■
Affix the valance returns to the ends of the valance headboard (outside mounts only). Press
the strip of hook-and-loop material on the valance returns to the hook-and-loop material on
the ends of the headboard. Make adjustments as necessary until you are satisfied with the
appearance of the valance.
note:
Garment tacks are used to secure the returns during shipping. They can be left in
for a more tailored return or carefully removed for a fuller return.
Valance
Headboard
Return*
Return*
Valance Fabric
Return
Return
* Outside mounts only. Returns shown here on both sides.
Left return only and right return only are available. Inside
mount valances do not have returns.
Valance
Headboard
Return*
Return*
Valance Fabric
Return
Return
* Outside mounts only. Returns shown here on both sides.
Left return only and right return only are available. Inside
mount valances do not have returns.
