HunterDouglas Duette Honeycomb Shades, Installation Manual

INSTALLATION

8

Install the Shade

■

Refer to the appropriate page based on your order.

➤

For LiteRise

®

 shades: see the 

Duette Honeycomb Shades LiteRise Installation, 

Operation, and Care 

document.

➤

For PowerView

®

 shades: see the 

Duette Honeycomb Shades PowerView Automation 

Installation, Operation, and Care 

document.

Test the Shade

■

Test the operation. The shade should be evenly spaced from both rear channels and 
operate smoothly.

➤

For LiteRise shades: use the handle to lower/raise the shade. Refer to the 

Duette 

Honeycomb Shades LiteRise Installation, Operation, and Care 

document.

➤

For PowerView shades: use the control button to test the operation. Refer to the 

Duette Honeycomb Shades PowerView Automation Installation, Operation, and Care 

document.

NOTE:  

If the channels interferes with the shade’s operation, make sure the side channel is 

installed completely to the mounting channel.

Finish the Installation

Install Bottom Channel

■

Clean the sill using standard household cleaners.

■

Test fit the bottom channel.

➤

Trim the channel, if needed.

■

Remove the protective liner from the bottom channel.

IMPORTANT:  

Be sure that the bottom channel cover is placed on the street side.

Bottom Channel

Bottom 

Channel

Cover

Room Side

Street Side