CARE
11
Removing the Shade, If Necessary
■
While keeping the track clips in place, unsnap the rail clips.
➤
With Top-Down/Bottom-Up shades, unsnap the rail
clips on both the middle rail and bottom rail.
■
While holding the headrail, push
back on the bottom tab of the
installation bracket with a flat
head screwdriver to release the
bottom of the headrail.
■
Then roll the back of the headrail
down and out from the bracket.
Removing the Side Tracks, If Necessary
■
If the side track is recently attached (within minutes), it may be pried off with a putty knife.
■
If the adhesive on the side track has began to set, use a hand held heat gun to locally heat
the adhesive and facilitate the removal.
■
Remove the adhesive residue from the mounting surface with a solvent like 3M
™
Citrus Base
Cleaner or automotive bug and tar remover (follow the manufacturer’s directions).
■
New adhesive will be required to re-attach the side tracks.
■
Do not attempt to reuse the side track adhesive. Failure to properly use the adhesive may
result in injury or property damage.
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab
