INSTALLATION
3
Prepare for the Installation
■
Wipe and clean the mounting surface with isopropyl alcohol.
WARNING:
A clean mounting surface is required for proper adhesion. Failure to
properly prepare the mounting surface may result in injury or property damage.
■
Peel back
3
/
4
" of adhesive backing from the back of the
side tracks.
■
Adhere end caps to the back of the side tracks.
■
Insert the track clip into the side tracks.
➤
With the end caps on the bottom, the track clips should face inward toward each other.
NOTE:
For Top-Down/Bottom-Up shades, insert two clips into each track.
■
Slide the track clips until they rest on the end caps.
