OPERATION
12
Attach the Magnetic Hold-Down Brackets (Optional)
■
Lower the shade until it is fully lowered and rotated back
toward the window.
■
Attach the magnetic hold-down brackets onto the bottom rail
just inside the end caps, oriented as shown.
■
Mark the screw locations using one of the mounting options
shown below.
➤
The screw should be placed in the middle of the channel.
This will allow for adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust the bracket height by loosening the screw
and sliding the bracket up or down.
Magnetic
Hold-Down
Bracket
End
Cap
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust the
bracket
up or down
using the
channel.
Summary of Contents for EasyRise
Page 22: ...Notes...
Page 23: ......
