OPERATION
22
Operate the Blind
Raising and Lowering the Blind – PowerView
®
Gen 3 Automation
Operating System
IMPORTANT:
Whenever raising or lowering the blind,
the slats must be in the open position.
■
Pull the single cord down and toward the
center to raise and lower.
■
Hold the single cord to the outside to lock
the blind in position.
Raising and Lowering the Blind – SimpleLift
™
with PowerView
®
Gen 3 Automation Operating System
IMPORTANT:
Whenever raising or lowering the blind, the slats must be in the open position.
To Raise the Blind:
■
Grasp the bottom rail near the center with one hand while balancing the bottom rail with
your other hand.
■
Fully press the center button with your thumb and gently lift the bottom rail.
■
Allow the slats to stack evenly by gradually lifting the bottom rail while the center button
is fully depressed.
■
Hold the bottom rail stationary at the desired position while releasing the button.
■
For inside mount blinds:
When raising the blind, pull the bottom rail slightly toward
you. Press the center button and gently raise the bottom rail. Once the desired height is
reached, hold the bottom rail in place while releasing the button. Place the blind back into
the window opening and the blind will stay in that position.
To Lower the Blind:
■
Fully press the center button with your thumb and pull
the bottom rail down to the desired height.
■
Hold the bottom rail stationary at the desired position
while releasing the button.
■
For inside mount blinds:
When lowering the blind,
pull the bottom rail down and slightly toward you.
Release the button and place the bottom rail onto
the sill.
Summary of Contents for EverWood
Page 34: ...CHILD SAFETY 32 ...
