HunterDouglas Luminette PowerGlide 2.0 Quick Installation Tips Download

Page: 1 / 4

Placing The Brackets

Measure in 5" from the end of the headrail.

■

NOTE:

For proper operation, the SofTrak

headrail must be mounted level. Use a level to check

that the installation brackets are level and aligned. Shim the brackets if necessary.

Checking The Gear Alignment

Prior to attaching the modular motor assembly to
the drive assembly, the gear in the drive assembly
must be aligned (as shown on the following page).

Use a screwdriver to turn and align the gear.

■

Space Evenly

Headrail End Marks

Window Opening

Drive Assembly

Luminette

PowerGlide

2.0

Quick Installation Tips

Summary of Contents for Luminette PowerGlide 2.0

Page 1: ...el and aligned Shim the brackets if necessary Checking The Gear Alignment Prior to attaching the modular motor assembly to the drive assembly the gear in the drive assembly must be aligned as shown on...

Page 2: ...ing The Motor Assembly Align the pins on the motor assembly with the holes in the drive assembly and press the motor up until it clicks in place If snapping in seems difficult try moving the carriers...

Page 3: ...down gently on the motor assembly to separate Method 2 This method works best when a sheer is installed on the headrail Unhook the end treatment and the first vane prior to detaching motor assembly I...

Page 4: ...on the remote control for both tilt and traverse functions Quickly Press and Release the UP or DOWN button to traverse the sheer s The sheer s must be fully traversed before rotating vanes Press and...