HunterDouglas Luminette PowerGlide 2.0 Quick Installation Tips Download

Page: 2 / 4

Checking The Gear Alignment (continued)

Align the tilt gear to the arrows on the bottom of the drive assembly.

■

Attaching The Motor Assembly

Align the pins on the motor assembly with the holes in the drive assembly and press

■

the motor up until it clicks in place.

If snapping in seems diffi cult, try moving the carriers slightly by hand, away from

➤

the fully stacked position.

Tilt

Gear Not

Aligned

Tilt

Gear

Aligned

Drive Assembly

Motor

Summary of Contents for Luminette PowerGlide 2.0

Page 1: ...el and aligned Shim the brackets if necessary Checking The Gear Alignment Prior to attaching the modular motor assembly to the drive assembly the gear in the drive assembly must be aligned as shown on...

Page 2: ...ing The Motor Assembly Align the pins on the motor assembly with the holes in the drive assembly and press the motor up until it clicks in place If snapping in seems difficult try moving the carriers...

Page 3: ...down gently on the motor assembly to separate Method 2 This method works best when a sheer is installed on the headrail Unhook the end treatment and the first vane prior to detaching motor assembly I...

Page 4: ...on the remote control for both tilt and traverse functions Quickly Press and Release the UP or DOWN button to traverse the sheer s The sheer s must be fully traversed before rotating vanes Press and...

Brands by name