INSTALLATION
4
Connect the DC Power Supply
NOTE:
When power is connected to the motor, a green
LED inside the manual control button housing will flash to
indicate the sheer is ready for operation.
■
Plug the power cable from the motor into the
extension cable.
■
Plug the other end of the extension cable into the DC
power supply.
■
Secure the extension cable using the C-clips
provided. Hide the cable behind the fabric, making
sure it does not impede operation.
■
Space the C-clips approximately 15" apart along the
extension cable, as shown.
■
Plug the DC power supply into the power source.
WARNING:
Keep cables and small parts
out of the reach of children. They can wrap
cables around their necks and
STRANGLE
.
They can also put small parts in their mouths
and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur if not properly installed.
15"
Maximum
DC
Power
Supply
Wire Retainer
Extension Cable
Power Cable
Motor
Assembly
