INSTALLATION
12
Attach the Valance Splice (If Required)
For valances that are spliced, join the two mitered valance pieces
together by sliding the valance splice clip over the back of the
valance where the two halves meet.
Mount the Headrail
■
Tilt the headrail so that its back lip slides under the front lip of the end brackets and
intermediate bracket(s).
■
Push the headrail against the back of the end brackets.
■
Check that the front lip of the intermediate bracket(s) is under the front lip of the headrail.
Valance
Splice Clip
Miters
End Bracket
Intermediate Bracket
