INSTALLATION
7
Attach the End Brackets
■
Align the outside edge of each end bracket with the outer marks and mark diagonal screw
holes.
➤
Use a
3
⁄
32
" drill bit to drill holes for the mounting screws.
■
Attach the end brackets using two screws through diagonal holes.
➤
If using spacer blocks, use #6
screws long enough for a secure
installation (2
1
⁄
2
" long screw
recommended).
IMPORTANT:
The tops of the end
brackets must align.
CAUTION:
The rear of the end brackets
or spacer blocks must be flush against a
flat mounting surface. Do not mount end
brackets on a curved molding.
Attach the Intermediate Brackets (If Required)
■
Evenly space the intermediate bracket(s) between the two end brackets.
➤
Adjust spacing if needed to avoid interference with internal headrail mechanisms.
■
Attach the intermediate bracket(s) with
two screws through diagonal holes.
IMPORTANT:
The tops of the end brackets
and intermediate bracket(s) must align.
Intermediate
Bracket
End
Bracket
End
Bracket
Space Evenly
Space Evenly
