FRAME ASSEMBLY
5
Panel Systems
L-Frame Build-Out
½
"
Deluxe Casing Frame Build-Out
Deluxe Casing Sill/
Extended L-Frame Build-Out
5. Frames with T-posts:
Attach the T-post to
the
top frame
.
➤
T-post blocks will be pre-attached to the
top and bottom frame pieces.
➤
Slide the T-post onto the T-post block on
the top frame piece and secure the T-post
to the block using a #2 Phillips bit to drive
the provided bugle head screw.
IMPORTANT:
A long driver bit is required to
get enough access to drive the screw.
NOTE:
See Step 8 on page 6 if T-post blocks
were not provided, or for three-sided frames
or inside mounts with no frames.
6.
Attach the
bottom frame
to the side frames
and T-post, repeating the methods described
in Steps 2 through 5.
7. Deluxe Casing Frame, outside mount Standard L-Frame, and outside mount Deluxe
Casing Sill/Extended L-Frame only:
If build-out is needed for additional clearance, install
the build-out onto the back of the frame.
➤
The build-out snaps onto the back of the frame.
T-Post
T-Post Block
Top
Frame
#8 x 2"
Bugle Head Screw
