3. Reversing motor direction
IMPORTANT
Reversing motor direction is only possible with a fresh out of the box motor (no limits set) or when the
end limits are
reset.
Before any limits are programmed, the motor direction has to be checked and
reversed if needed.
If the top or bottom Limit is already set, and the motor direction has to be reversed, perform a
reset
before continuing.
3.1. Deselect all GROUP numbers on the remote
IMPORTANT
Watch out to perform steps 3.1.2 and 3.1.3 within 3 seconds!
3.1.1
Deselect all Group number on the remote
3.1.2
Press and hold
the
manual control button
.
Page 5 of 18
version: 1.0