OPERATION
15
To Operate the Rear Shade
NOTE:
The front shading must be fully lowered and the vanes fully open.
■
■
To lower the rear shade, pull the wand down and release.
■
■
To raise the rear shade, push the wand up and release.
To Operate the Vanes
NOTE:
The front shading must be fully lowered and the rear shade fully raised.
■
■
To move the vanes to the fully open position, pull the wand down and release.
■
■
To move the vanes to the fully closed position, push the wand up and release.
Set and Go to a Favorite Position
NOTE:
The default favorite position is the rear shade fully raised and the front shading at 50%
open with the vanes closed.
Set a Favorite
With the rear shade fully raised and the front shading vanes closed:
■
■
Put the shading in motion.
With the shading still in motion
, as it reaches the desired
Favorite position, push the wand up (or pull the wand down) and hold for approximately 4
seconds.
■
■
The shading will beep and the front shading moves slightly twice (down, up) to indicate a
new Favorite position is set.
Go to Favorite
■
■
With the shading stationary, or moving — in a single motion, quickly push the wand up and
pull the wand down and release. The shading will move to the Favorite position.
NOTE:
Quickly pulling the wand down and pushing the wand up will also work.
Summary of Contents for Silhouette Duolite Window Shadings PowerView Motorization
Page 34: ...Notes...
Page 35: ......
