CARE
23
Removing the Shading
■
■
Move each lever of the installation brackets to the left to release
the shading.
■
➤
A flat blade screwdriver can be used to move the lever.
CAUTION:
Be very careful to not tear or damage any of
the fabric.
■
➤
If the lever is inaccessible or
inoperable, lower the shading
until you can see the underside
of the bracket. Carefully reach
a thin flat blade screwdriver
behind the shading to the tab on
bottom of the bracket between
the screw holes.
■
➤
Push the tab away from the
shading and pull the headrail to
release it from the bracket.
■
■
Carefully pull the shading to remove
it from the brackets.
Cleaning Procedures
Silhouette
®
window shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the facings.
Cleaning the Palette
®
Fabric-Covered Headrail
■
■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap
solution; handle with care as you would any fine fabric.
Cleaning the Front Silhouette Shading
Dusting
■
■
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
■
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Move the lever to the left
to release the shading.
Top View
Tab
Installation Bracket
End Cap
Underside of
Bracket
