INSTALLATION
7
Spacer
Blocks
Longer
Screws
1
1
/
2
" Maximum
Added Clearance
Extension
Bracket
Speed Nuts
Screws
Additonal Clearance with Spacer Blocks
NOTE:
A minimum of
3
/
4
" additional clearance is required for PowerView
™
shadings with
battery wand.
■
■
If using
1
/
4
" or
1
/
2
" spacer blocks, attach the spacer block(s)
and installation bracket to a flat vertical mounting surface
with #6 screws long enough for a secure installation.
IMPORTANT:
The solid side of the spacer blocks must face
toward the mounting surface.
Additonal Clearance with Extension Brackets
■
■
If using extension brackets, attach each extension
bracket to the mounting surface using the screws
provided.
■
■
Attach an installation bracket to the underside of
each extension bracket using the provided screws
and speed nuts.
NOTE:
The maximum amount of added clearance
using extension brackets is 3".
Proceed to “STEP 2: Install the Shading” on page 8.
