INSTALLATION
11
Check the Power Cord
■
Check to ensure the power cord is not visible from the front of the shade.
➤
If it is visible, adhere the wire saddle on the power cord to the back of the shade.
If you ordered Magnetic Hold-Down Brackets, proceed to “Attach Magnetic Hold-Down
Brackets (Optional)” on page 14; otherwise proceed to “Testing the Shade” on page 15.
If You Have a Satellite Battery Pack...
Mount the Satellite Battery Pack
■
Decide where you want to attach the wall mount bracket. A satellite battery pack may be
installed in any orientation.
■
Pre-drill the screw holes using a
3
/
32
" drill bit.
■
Remove the backing from the double-sided tape on the
wall mount bracket. Press the bracket into place.
■
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the wand into the wall mount bracket.
Wall Mount Bracket
Socket
Wire
Saddle
Back of Shade
Visible
Wire
Wire
Saddle
Back of Shade
Visible
Wire
