INSTALLATION
14
Attach Magnetic Hold-Down Brackets (Optional)
■
Completely lower the shade.
■
Attach the magnetic hold-down bracket onto the
bottom rail just inside the end cap, oriented as shown.
■
Mark the screw locations using one of the mounting
options shown below.
➤
The screw should be placed in the middle of the
channel. This will allow for adjustment.
■
Pre-drill the screw holes using a
3
/
32
" drill bit.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust the bracket height by loosening the screw
and sliding the bracket up and down.
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Magnetic
Hold-Down
Bracket
End
Cap
Adjust the
bracket
up or down
using the
channel.
