INSTALLATION
7
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting techniques will not work — for example,
in an arched window.
■
Mount the extension brackets on a flat vertical surface at least 1
1
/
2
" wide.
NOTE:
Minimum mounting depth for a fully
recessed end mount is 2
3
/
4
" wide.
➤
The top of the extension brackets should be at
the desired shade height.
IMPORTANT:
The brackets must be level
and aligned.
➤
Be sure to allow for the
3
/
4
" rear fabric
fold clearance.
CAUTION:
The rear of the extension brackets
must be flush against a flat mounting surface. Do
not mount the extension brackets on the curve of
the arch opening.
■
Mark two screw holes per bracket.
■
Attach the extension brackets using the screws provided.
IMPORTANT:
Use a level to check that the mounting surface is level.
■
Attach the installation brackets to the underside of the extension brackets using the
provided screws and speed nuts.
CAUTION:
Both brackets must be installed at the same depth and height.
Proceed to “STEP 2 — Install the Shade” on page 8.
Speed
Nut
Screw
2
3
/
4
"
Fully Recessed
Minimum
