INSTALLATION
11
•
Hold the cord tensioner firmly in place and check that the cord can
move freely through it. If the cord does not move freely through the
cord tensioner, it is too tight and the cord tensioner and/or bracket
should be moved up. If the cord tensioner locks onto the cord, it is
too loose and the cord tensioner and/or bracket should be moved
down. Mark and pre-drill the screw hole.
•
Mount the cord tensioner with a Phillips screwdriver and one of
the longer screws provided to attach the cord tensioner directly
to the wall.
•
Finally, ensure the cord can move freely through the cord
tensioner without engaging the lock. The centre of the
screw hole should be aligned with the indicator line on
the cord tensioner. Do not pull the screw hole down to the
bottom of the slot. This may cause the cord to become
too tight, affecting the window covering function and
increasing cord wear.
Reveal Mount with a Bracket
• This option uses three screws with the inside mount
bracket and slightly projects the cord loop from the
window covering allowing for easier access. Locate the
cord tensioner as close to the window glass as possible
to minimize accessibility by children and pets. Be sure
the cord tensioner is not placed in the path of the
bottom rail and fabric.
Reveal
Face
• Break off the inside mount bracket and mark screw locations.
