INSTALLATION
13
Face Mount
• This option uses three screws and is attached to an
outside mount bracket. Locate the cord tensioner as
close to the window covering as possible to minimize
accessibility by children and pets. Be sure the cord
tensioner is not placed in the path of the bottom rail and
fabric.
• Break off the outside mount bracket and mark screw
locations.
• Attach the outside mount bracket to the cord tensioner. The nub on
the outside mount bracket fits into the back of the screw hole in the
cord tensioner.
• Insert the small screw into the front of the screw hole to
secure the cord tensioner to the bracket.
• Pull down on the bracket, aligning the centre of the screw
hole with the indicator line on the cord
tensioner. Hold the cord tensioner firmly in
place and check that the cord can move
freely through it.
• If the cord does not move freely through
the cord tensioner, it is too tight and the cord tensioner and/or bracket
should be moved up. If the cord tensioner locks onto the cord, it is too
loose and the cord tensioner and/or bracket should be moved down.
Mark and pre-drill the screw holes.
• To mount the cord tensioner, detach the cord tensioner
from the bracket by removing the small screw. Use
a Phillips screwdriver and the two longer screws
provided to attach the outside mount bracket to the
wall.
• Reattach the cord tensioner to the outside mount bracket using
the smaller screw provided.
Reveal
Face
