15
Spillage Monitoring System
The appliance is fitted with spillage system (TTB), which is located near the draught diverter and
operates to shut the appliance off if the evacuation of combustion products is interrupted (for
example caused by lack of flue pull or flue blockage).
The spillage system MUST NOT be adjusted, modified or put out of action by the installer. The
spillage system MUST NOT be removed or ‘bridged out’ for any reason. If the spillage system is faulty
and requires replacement, only genuine Hunter Stoves parts should be used.
Nuisance shut down may occur if the stove is not installed in accordance with the clearance
distances set out in diagram 2 on page 7.
