EN
49
fins in the coldest place with the largest ice formation, away from the heaters and the
warmest place.
10.
QUICK START
10.1.
HKN-BCF3L, HKN-BCF5L control panel display
10.1.1.
Background information
These models have the following operating statuses:
➢
“On” – the device is switched on and functioning;
➢
“Stand-by” – the device is switched on, but stands by;
➢
“Off” – the device is switched off.
In case of accidental power failure during the cooling/freezing cycle set by the timer, after
restoration of power the device will continue the cycle from the phase as of power failure
(with the maximum error of 10 minutes).
In case of accidental power failure during the cooling/freezing cycle set by the temperature
(using the thermal probe), after restoration of power the device will start a new cycle.
In case of accidental power failure during the storage cycle, after restoration of power the
device will terminate this cycle.
In case of accidental power failure during the stand-by mode, after restoration of power the
device remains in this mode.
10.1.2.
Basic data displayed
The device in the normal operation mode displays as follows:
➢
Remaining time of the cooling/freezing cycle with a preset timer;
➢
Temperature of the thermal probe if the device is functioning in the temperature
control mode;
➢
Chamber temperature in the storage mode;
The device in the stand-by mode displays the chamber temperature by lighting up for ½
seconds every 3 seconds.
set
