EN
50
10.2.
Operating cycles of HKN-BCF3L, HKN-BCF5L models
10.2.1.
Background information
The device performs the following operating cycles:
➢
Time-adjusted cooling and storage in the above-zero temperature zone;
➢
Time-adjusted cooling and storage in the below-zero temperature zone;
➢
Temperature-adjusted cooling and storage in the above-zero temperature zone;
➢
Temperature-adjusted cooling and storage in the below-zero temperature zone;
To repeat the previous cycle:
➢
press and hold
button for 2 sec: the icon of the previous cycle will be
displayed;
➢
press
for 60 sec: in case of the time-adjusted cooling cycle, the cooling cycle
time in minutes will be displayed; in case of the temperature-adjusted cooling
cycle, the set temperature will be displayed;
➢
press
or
for 15 sec to change values (settings are maintained until
another cycle is selected);
➢
press
button for 15 sec to activate the cycle.
10.2.2.
Time adjustment of the cycle in the above-zero temperature zone
To start the cycle:
➢
make sure that the device is in the stand-by mode;
➢
press
to select the above-zero temperature mode
PoS
and make sure that
indicator lights up and flashes;
➢
press
for 15 sec: the cycle duration in minutes will be displayed;
➢
press
or
for 15 sec to adjust the time;
➢
press
: the temperature of the cooling limit set point (in C°/F°) will be
displayed, and
indicator lights up;
➢
press
or
for 15 sec to adjust the parameter value;
➢
press
button for 15 sec to activate the cycle.
