EN
58
Selection of Soft cooling cycle (1):
press and release
button,
icon blinks off, and
icon still lights up. To start
the cycle, press and release
button.
Cycle interruption:
press and release
button, the icon of the corresponding cycle starts flashing. The
cycle restarts by pressing
button again or automatically restarts when the set
parameter (maximum cycle interruption time) is reached.
Full stop (cancellation):
press and hold
button for more than 2 sec to switch the device to the stand-by
mode.
Other cycles are selected and started in accordance with the similar procedure.
10.3.3.
Setting the real time clock (RTC):
press and hold
button to access the clock setting menu to set the date and time. Use
arrows to display elements: Min=minutes, Hou=hours, dAY=days,
Mon=month, YEA=year, tiM=date format: Eu=dd/mm/yyyy, USA =mm/dd/yyyy.
arrows are also used to switch between parameters.
To edit, press
button; to apply the changes, press this button again.
