EN
33
2.
HOW TO OPERATE THE MACHINE
2.1 INSTALL THE MACHINE
Never start the machine if it does not contain water or coffee beans.
1. Put drip tray [1] into the groove which located in lower part of the
machine make sure the drip tray cover is correctly positioned.
2. Take accessories of the machine out fromthe water tank [8]
3. Remove coffee bean tank cover and put the proper quantity of
coffee beans (no more than 200g) into the container.
4. Remove the water tank [8] from the machine, fill it with fresh
water to 3/4 capacity. The valve in bottomof thewater tank is for
water discharging. Gently press downthe water tank, then cover the
lid to replacement.
5. Untie the cord [2], then connect to power supply, turn the power
switch [3] on and press the power button on the control panel. The
screen shows first and then Disappearance of the tiny dots represents
the boiler temperature reaches a higher level. The machine will start
rinsing after the boiler reaches appropriate temperature. Please wait
until a
“
beep
”
and the screen shows FIG.2, the machine has
finished the preparatory.
Install the drip tray
Take out spoon from
the water tank
Put coffee bean
into bean tank
Take off water tank
and infuse fresh water
to 3/4 capacity
Maschine einschalten
flow out some water
Button
«ON»
