EN
40
DREG DRAWFULL
If this message is indicated on the LCD dreg drawer [16] is full,
remove the dreg drawer and empty it.
NOTE: The dreg drawer may be emptied only when the machine is power on.
The dreg drawer must be removed for more than 5 seconds, otherwise the warning
tone will be repeated.
DRIP TRAY MISSING
If this message is indicated on the LCD, install the drip tray [1] or
make sure it is well positioned
DREG DRAWER MISSING
Dreg drawer [16] is not in the right position, please check if the
dreg drawer is installed, or if correctly installed.
BREWING UNIT MISSING
Brewing unit [14] is not in the position, please check if the
brewing unit is installed, or if correctly installed.
CLOSE THE DOOR
Brewing door [13] is not in the right place, Be sure to put the
brewing door in the right place
VENTILATE
The machine in a vacuumstate, the need for the machine to
carry out drainage action (please refer to earlier drainage
section).
DECALCIFY
When LCD shows
“
DECALCIFY
”
, that means the machine needs
to be descaled. Press " ESC " to cancel decalcify, (The warning
will be repeated next time). Press " OK " to continue.
