background image

7

The generally applicable, legal and other binding national and international regulations 
pertaining to the prevention of accidents and protection of the environment apply and are to 
be implemented in addition to the operating instructions.

W A R N I N G   /   C A U T I O N !

The equipment 

is to be used exclusively

 for the 

purpose stated in the operating 

instructions (see chapter “Intended Use”)

.  Any other or further use is 

not considered 

intended use

. The manufacturer / supplier is not liable for any damages resulting from 

unintended use. The user bears sole responsibility for such. 
Observance of the operating instructions and compliance with the inspection and maintenance 
conditions are part of the intended use. 

Never work when you are overtired or intoxicated!

The equipment is fi lled 
with a hydraulic fl uid. 
These hydraulic fl uids can 
be dangerous to health if 
swallowed or their vapors 
inhaled. Direct contact with 
the skin is to be avoided for 
the same reason. Please also 
note that hydraulic liquids can 
also have a negative effect on 
biological systems.

When working with or storing 
the equipment, ensure that 
the function and the safety 
of the equipment are not 
impaired by the effects of 
stark external temperatures 
or that the equipment is 
damaged in any way.  Please 
note that the equipment can 
also heat up over a long 
period of use.

Ensure adequate lighting 
when you are working. 

Before transporting the 
equipment, always ensure 
that the accessories are 
positioned such that they 
cannot cause an accident.

Always keep these operating 
instructions within reach 
where the equipment is used.

Ensure the proper disposal 
of all removed parts, left-over 
oil, left-over hydraulic fl uid 
and packaging materials!

WARNING / CAUTION!

HURST BLUE hydraulic fl uid is a custom blended fl uid. In case of skin contact, 
wash off with soap and water. In case of eye contact, fl ush with generous 
amounts of running water for at least 15 minutes. If discomfort persists following 
fl ushing, see physician for symptomatic treatment.

Summary of Contents for KL-32





































Reviews: