www.PyleUSA.com
13
Problem
Potential Causes
Corrections
Treadmill won't
start
1. Treadmill not plugged in
2. Safety Tether Key is not
correctly installed.
3. House Circuit breakers
has "tripped"
4. Treadmill circuit breakers
has "tripped"
1. Plug the power cord into the
wall outlet
2. Reinstall the Safety Tether Key
3. Reset the circuit breaker, or
call an electrician to replace
the circuit breaker.
4. Wait 5 minutes and then try
to restart the treadmill.
Belt slips
Belt not tight enough
Adjust belt tension
Belt hesitates when
stepped on
1. Not enough lubrication
applied onto the running
deck.
2. Belt is too tight
1. Apply lubricant.
2. Adjust belt tension
Belt is not centered Running belt tension not
even across the rear roller
Center the belt
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE
WARNING:
To prevent electrical shock, please turn off and unplug the treadmill
before cleaning or performing routine maintenance.
WARNING:
Always check the wear and tear components like spring knob and
running belt to prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed
from the unit. The treadmill can be cleaned with a soft cloth and mild detergent.
Do not use abrasives or solvents. Be careful not to get excessive moisture on the
display panel as this might damage the unit and create an electrical hazard.
Please keep the treadmill, especially the computer console, out of direct sunlight to
prevent damage to the screen.
STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the
unit outdoors. Ensure the master power switch is off and the power cord is
un-plugged from wall outlet.
TROUBLESHOOTING GUIDE
