HURTLE HURTRD18, User Manual

www.PyleUSA.com

7

Step 4
A. 

Remove one 

Flat Head Phillips Screw

 from both sides of the 

Frame

. Attach the  

Rear Left Cover

 onto the left side of the Frame. Align the holes and secure the  

Rear Left Cover

 using the one 

Flat Head Phillips Screws

 , that were previously  

     removed by Allen Wrench.

B. 

Align the holes and secure the 

Rear Right Cover

 using the one 

Flat Head Phillips  

     Screws

 that were previously removed by 

Allen Wrench

.

INCLINE ADJUSTMENT

There are 3 incline angles that the 

Incline Adjuster

 can be set to. 

Place one hand on the rear end of the main frame, then lift the rear end of the main 
frame up and use the other hand to remove the 

Lock Pin

. 

Adjust the 

Incline Adjuster

 to the desired position and insert the 

Lock Pin

 into the 

holes on the main frame and 

Incline Adjuster

 to lock the 

Incline Adjuster

 in place.

NOTE: 

Make sure when adjusting the incline angle of the Incline Adjuster that both 
Incline Adjusters should be adjusted to the same angle. 
Using the Incline Adjusters at different angles can cause the treadmill to be 
unstable and cause injury.

Incline Adjuster 

Lock Pin