background image

4

Operator's Manual

26750TSC Compact Tiller

For additional information email 

info@ardisam.com

 or call 800-345-6007 M-F 8-5

 ImPORTaNT

THE RIGHT aND lEFT SIDES OF YOUR RO-

TOTIllER aRE DETERmINED FROm THE 

OPERaTING POSITION aS YOU FaCE THE 

DIRECTION OF FORWaRD TRaVEl.
ENGINE IS SHIPPED FROm FaCTORY WITH-

OUT OIl. YOU mUST aDD ENGINE OIl BE-

FORE STaRTING ENGINE.

GENERal SaFETY RUlES

• 

Read, understand, and follow all instructions on the machine 

and in the manual(s). Be thoroughly familiar with the controls 

and the proper use of the machine before starting. 

• 

Use this equipment for its intended purpose only.

• 

Familiarize yourself with all of the safety and operating 

decals on this equipment and on any of its  attachments or 

accessories.

• 

Do not put hands or feet near or under rotating parts.

• 

Only allow responsible individuals who are familiar with the 

instructions to operate the machine.  Do not allow children 

to operate this machine. Do not allow adults to operate the 

machine without proper instruction.

• 

Thoroughly inspect the area where the machine is to be 

used and remove all foreign objects. Your equipment can 

propel small objects at high speed causing personal injury 

or property damage. Stay away from breakable objects, such 

as house windows, automobile, greenhouses, etc.   

• 

Never wear sandals, sneakers, or open shoes, and never 

operate the machine with bare feet. 

• 

Do not wear loose clothing or jewelry. They can get caught in 

moving parts.  Always keep hands, feet, hair and loose clothing 

away from any moving parts on engine and machine.

• 

Always wear safety goggles or safety glasses with side shields 

when operating the machine to protect your eyes from 

foreign objects which can be thrown from the unit.  Always 

wear a protective hearing device.

• 

Always wear work gloves and sturdy footwear.  Wear 

footwear that will improve footing on slippery surfaces. 

• 

Do not operate the machine without proper guards, covers, 

hoods or other safety protective devices in place.

• 

See manufacturer’s instructions for proper operation and 

installation of accessories. Only use accessories approved 

by the manufacturer.

• 

Operate only in daylight or good artificial light.

• 

Do not operate product when fatigued or under the 

influence of alcohol, drugs or other medication which 

can cause drowsiness or affect your ability to operate this 

machine safely. 

• 

Never operate machine in wet grass.  Always be sure of your 

footing; keep a firm hold on the handle and walk; never run.

• 

Watch for traffic when operating near, or when  

crossing roads.

• 

If the equipment should start to vibrate abnormally, stop the 

engine (motor), disconnect the spark plug wire and prevent 

it from touching the spark plug. Check immediately for cause. 

Vibration is generally a warning of trouble.  If the noise or 

vibrations of the machine increase, stop immediately and 

perform an inspection.

• 

Never leave the machine unattended when the engine is 

running. Remove the wire from the spark plug.

• 

Regularly inspect the machine. Make sure parts are not bent, 

damaged or loose. 

• 

Temperature of muffler and nearby areas may exceed 150° 

F (65° C). Allow muffler and engine areas to cool before 

touching. Never pick up or carry the machine while the 

engine is running. 

• 

Prolonged exposure to noise and vibration from gasoline 

engine-powered equipment should be avoided. Take 

intermittent breaks and/or wear ear protection from engine 

noise as well as heavy work gloves to reduce vibration in 

the hands.

• 

Keep all screws, nuts and bolts tight.

• 

Do not transport the machine from one place to another 

with the engine running.

• 

When moving the packaged machine, always do so with a 

partner.

• 

Check local regulations for age restrictions on use of this 

machine.

PRODUCT-SPECIFIC SaFETY RUlES

• 

Do not till above underground utilities, including water 

lines, gas lines, electric cables, or pipes. Do not operate the 

tiller in soil with large rocks and foreign objects which can 

damage the equipment.

• 

After striking a foreign object, stop the engine.   Remove 

the wire from the spark plug. Inspect the tiller for damage. 

If damaged, repair before starting and operating the tiller.

• 

The tines of the tiller should not rotate when the engine 

is idling. If they do rotate when engine is idling, contact 

customer service for instructions.

• 

If an object becomes lodged in the tines, turn engine off, 

remove the wire from the spark plug and secure, allow to 

cool before attempting to remove the foreign object.

• 

The tines can be very sharp. Use extreme caution when tilling 

or replacing the tines.

L

R

Summary of Contents for 26750TSC

























Reviews: