www.spartacogroup.com
800-860-6170
6
SPECIFICATIONS
Specifications
Output
7.8 Ton
Weight
9 lbs.
Size
17” L
Jaw Opening
.9”
S-240
Cutting Capabilities
Wire Rope
22mm, 7/8”
Soft Steel Bolts
22mm, 7/8”
Reba, Ground & Anchor
Rod
16mm, 5/8”
Cu & Al Wire
22mm, 7/8”
ACSR
22mm, 7/8”
Standard Guy Wire
16mm, 5/8”
Huskie’s
S-Series
tools cut anything from guy wire* to anchor rod and most overhead and underground cables. The S-series
cutters are portable, lightweight, and made to last years under the toughest field conditions. The S-40B and S-85 feature a
two stage pumping piston for rapid advance.
The new S-240CC, S-32CC and SP-24CC hydraulic cutters were specially engineered to cut the toughest EHS guy wire,
ground and anchor rods. The SP-24CC is the remote head version, which requires an external 10,000 psi pump in order to
operate. The anvil style, center cut blades eliminate jamming problems common to shear style cutters, and the blades are
easily replaced in the field. The tools are made of high grade steel and have rubber handle grips. All tools are black zinc oxide
coated to help reduce corrosion. A flip-top latch opens the tool jaw to easily accept cables and wires. The head can be rotated
up to 180° to facilitate easy wire positioning and operator leverage.
Consult the chart below to pick the proper cutter for your needs. If there are any questions about capacities, or special
applications please contact Huskie Tools.
*NOTE:
DO NOT CUT EHS GUY WIRE. FOR EHS GUY WIRE SPECIFY S-240CC, S-32CC OR THE REMOTE HEADS SP-24CC
OR SP-32CC1.
