Huskie Tools RCC-MK754ACM, Operator'S Manual

8

MODEL: RCC-MK754ACM

Battery and Charger Use and Care

• Before using battery charger, read all instructions and cautionary markings on battery charger,

battery pack, and product using battery pack.

• To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of

batteries may burst causing personal injury and damage.

• Do not leave charger and battery pack exposed to rain or snow, submerge in water, or stored in

damp or wet locations.

• To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when

disconnecting charger.

• Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to

damage or stress.

• Do not disassemble charger or battery pack, contact Huskie Tools service dept. at 800-860-6170

when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

• Do not store the tool and battery pack in locations where the temperature may reach or exceed

50°C (122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of

the storage battery.

• Do not charge battery pack when the temperature is BELOW 0°C (32°F) or ABOVE 40°C (104°F). This

is very important to maintain optimal condition of the battery pack.

• The charger is designed to operate on standard 120V AC electrical power only. Do not attempt to

use it on any other voltage.

• Charge the battery pack in a well-ventilated place, do not cover the charger and battery pack with a

cloth, etc., while charging.

• Use of an attachment not recommended may result in a risk of fire, electric shock, or personal

injury.

• Do not short the battery pack or allow metal objects to touch the terminals. A battery short can

cause a large current flow, overheating and create the risk of fire or personal injury.

• Huskie Tools is not responsible for any damage or accident caused by the use of recycled or

counterfeit battery pack.

• Do not incinerate the battery pack or dispose of the battery pack in a fire or expose it to excessive

heat.

• Do not charge the battery pack in a high-temperature location, such as next to a fire or in direct

sunlight. Otherwise, the battery may overheat, catch fire, or explode.

• After removing the battery pack from the tool or the charger, always re-attach the pack cover.

Otherwise, the battery contacts could be shorted, leading to a risk of fire.

• When the Battery Pack Has Deteriorated, Replace It with a New One. Continued use of a damaged

battery pack may result in heat generation, ignition or battery rupture.

• When storing, remove any material cuttings and dust from the battery pack, and place the battery

pack separately from metal objects (screws, nails, etc.) when storing in the tool case.