background image

6

 

MODEL: R

C

C-MK754ACM

 

Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,

gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep bystanders away while operating a power tool. Distractions can cause you to lose control.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A

moment of distraction while operating power tools may result in personal injury.

• Use personal protection equipment. Always wear eye protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will

reduce personal injuries.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

Tool Use and Care

• To prevent leakage, overheating, smoke generation, fire, and rupturing from occurring, follow these instructions when handling

our rechargeable power tools (tool main body/battery pack/charger).

• Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for

which it was designed.

• Do not use the tool if the switch does not turn it on and off. Any tool that cannot be controlled with the switch is dangerous and

must be repaired.

• Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing. Such preventive

safety measures reduce the risk of starting the tool accidentally.

• Store idle tools out of the reach of children and do not allow persons unfamiliar with the tool or these instructions to operate the

tool. These tools can be dangerous in the hands of untrained users.

• Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the

tools operation. If damaged, have the tool repaired before use.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and

fire.

• Under abusive conditions, liquid may be ejected from battery; avoid contact. If contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

SAFETY INFORMATION

Summary of Contents for RCC-MK754ACM















Reviews: