15
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Installation - Electrical (continued)
3
Making the electrical connections
□
Use a blunt tool and hammer to carefully tap out the
stamped cover (1) at the top of the magnetic starter
box (2).
□
Loosen the ground screw (3). Loosen the terminal
screws (4).
□
Install the strain relief (5) on the magnetic starter (2). Do
not tighten the screws (6) or nut (7) of the strain relief (5)
on the power cord until wiring is complete.
□
Insert the bare wires [black, red, bare/green](8, 9, 10)
through the strain relief (5).
□
Attach the bare/green ground wire (10) fi rst to the ground
screw (3) on the magnetic starter body.
□
Install the line wires (8, 9) and tighten the terminal
screws (4).
10
4
4
1
2
3
5
6
8
9
7
