Assemble Inflator/Deflator Kit
The blow gun (c) and blow gun
adapter (e) from the accessory kit is
needed to use the inflator/deflator kit.
1.
Attach the blow gun to hose.
2.
Attach blow gun adapter to blow
gun.
3.
Attach the inflating needle (h),
tapered nozzle (j), or high flow
inflator/deflator body (k) to the
blow gun adapter on the blow
gun.
4. If using the inflator/deflator
choose the nozzle needed and
see the "How to use High Flow
Inflator/Deflator Adapter Body"
instructions in the Operation
section for the correct procedure.
Assemble Accessories
The unit is supplied with an
accessory kit and inflator/deflator kit,
choose the accessory needed.
Assemble Accessory Kit
To Assemble Female Tire Chuck
1.
Assemble female tire chuck (a) to
hose (b) and tighten securely
with wrenches.
To Assemble Accessories
1.
Attach the blow gun (c) to hose (b).
Risk of unsafe
operation. If an
accessory is not being used with
the blow gun, the safety nozzle
MUST be assembled.
9- ENG
A05051
Assemble Hose
1.
Assemble hose to air outlet.
IMPORTANT: The hex fitting on
the air outlet MUST be held in
place with a wrench when
tightening hose onto air outlet.
Unpacking
1.
Remove unit from carton and
discard all packaging. NOTE:
Save all parts bags.
Safety Nozzle
a
c
b
e
d
g
f
h
c
e
h
j
k
2.
Assemble the safety nozzle (d),
tapered inflator (g), rubber blow
gun tip (h), or blow gun adapter
(e) to blow gun. NOTE: To use
the inflating needle (f) the blow
gun adapter has to be
assembled to blow gun.
3.
Attach the inflating needle (f) to
the blow gun adapter on the
blow gun.
Summary of Contents for A05051
Page 58: ...58 FR A05051 NOTES...
Page 59: ...59 FR A05051 NOTES...
