8
Technical Support: 01455 555340 (UK)
CUB300LH, CUB300RH & CUB500H Display Chillers
IMPORTANT – MAINTENANCE
The condenser and the compressor compartment MUST be cleaned quarterly in
order to ensure appropriate temperature control and maintain energy efficiency.
Use a vacuum cleaner fitted with a soft brush attachment to remove dust
carefully from the condenser, the components and grilles.
The external and internal surfaces of the appliance should be cleaned regularly.
Switch the appliance off and disconnect the plug from the mains socket. Clean
the external and internal surfaces of the appliance with a mild soap solution, then
wipe dry. Do NOT use cleansers containing chlorine or other harsh cleansing
agents, as these can damage the stainless steel surfaces and components. Use
mild soapy water to clean the gasket and seals.
SERVICE ASSISTANCE
The cooling system is a hermetically sealed circuit and does not require any maintenance other
than regular cleaning (see ‘Maintenance’).
If the appliance fails to work, first check the troubleshooting guide on page 5. If you cannot
locate the reason for the failure, please contact your supplier, stating the model and serial
number of the cabinet. You may find this information on the rating plate, which is affixed on the
back wall or inside the appliance.
CUB300_CUB500 Display Cabinet Range manual 0418 v2.indd 8
19/04/2018 08:54
