HOSE
COUPLER
THREAD
SEALING
TAPE
SAFETY
VALVE
REGULATOR
PRESSURE
GAUGE
AIR OUTLET
PRESSURE
REGULATOR
KNOB
ON/OFF
SWITCH
ASSEMBLY
12
ATTACHING HOSE AND QUICK COUPLER
See Figures 3 - 5.
Make sure the air compressor is off and unplugged.
Rotate pressure regulator knob fully counterclockwise.
Apply thread sealing tape to both ends of the hose and
to every male threaded end (Fig. 3).
Insert thread end of hose into open end of air outlet
fitting on compressor. Use open-end wrench to tighten
securely (Fig. 4).
NOTE:
Be careful not to allow threads to become
cross-threaded.
Attach female quick coupler to other end of hose and
tighten securely (Fig. 5).
Firmly grasp the open end of the hose; hold facing
away from yourself and others.
BREAKING IN THE PUMP
See Figures 6 - 7.
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to
open the air flow.
Place the switch in the
OFF
position and plug in the
power cord.
Open the drain valve completely.
Turn the air compress
ON ( l )
and run the air
compressor for 10 minutes to break in pump parts.
Place the switch in the
OFF
position.
Close the drain valve.
WARNING:
Do not attach any tools to the open end of the hose until
start-up has been completed.
Fig. 3
THREAD
SEALING
TAPE
HOSE
Fig. 5
AIR OUTLET
FITTING
Fig. 7
DRAIN
VALVE
THREAD
SEALING
TAPE
Fig. 6
HOSE
Fig. 4
TANK
PRESSURE
GAUGE
Summary of Contents for H2G3TK
