Husky H2G3TK, Operator'S Manual

„

THEMANUFACTUREROFYOURAIRTOOLINADDITIONTOALL
SAFETYRULESFORTHEAIRCOMPRESSOR&OLLOWINGTHIS
RULEWILLREDUCETHERISKOFSERIOUSPERSONALINJURY

„

ORANIMALS4AKECARENOTTOBLOWDUSTANDDIRT
TOWARDSYOURSELFOROTHERS&OLLOWINGTHISRULEWILL
REDUCETHERISKOFSERIOUSINJURY

„

0ROTECTYOURLUNGS7EARAFACEORDUSTMASKIFTHE
OPERATIONISDUSTY&OLLOWINGTHISRULEWILLREDUCETHE
RISKOFSERIOUSPERSONALINJURY

„

$ONOTUSETHISAIRCOMPRESSORTOSPRAYCHEMICALS
9OURLUNGSCANBEDAMAGEDBYINHALINGTOXICFUMES!
RESPIRATORMAYBENECESSARYINDUSTYENVIRONMENTSOR
WHENSPRAYINGPAINT$ONOTCARRYWHILEPAINTING

„

)NSPECTTOOLCORDSANDHOSESPERIODICALLYANDIF
DAMAGEDHAVEREPAIREDATYOURNEAREST!UTHORIZED
3ERVICE#ENTER#ONSTANTLYSTAYAWAREOFCORDLOCA
TION&OLLOWINGTHISRULEWILLREDUCETHERISKOFELECTRIC
SHOCKORFIRE

„

.EVERUSEANELECTRICALADAPTORWITHTHISGROUNDED
PLUG

„

#HECKDAMAGEDPARTS"EFOREFURTHERUSEOFTHEAIR
COMPRESSORORAIRTOOLAGUARDOROTHERPARTTHAT
ISDAMAGEDSHOULDBECAREFULLYCHECKEDTODETER
MINETHATITWILLOPERATEPROPERLYANDPERFORMITS
INTENDEDFUNCTION#HECKFORALIGNMENTOFMOVING
PARTSBINDINGOFMOVINGPARTSBREAKAGEOFPARTS
MOUNTINGANDANYOTHERCONDITIONSTHATMAYAFFECT
ITSOPERATION!GUARDOROTHERPARTTHATISDAMAGED
SHOULDBEPROPERLYREPAIREDORREPLACEDBYANAU
THORIZEDSERVICECENTER&OLLOWINGTHISRULEWILLREDUCE
THERISKOFSHOCKFIREORSERIOUSINJURY

„

-AKESUREYOUREXTENSIONCORDISINGOODCONDITION
7HENUSINGANEXTENSIONCORDBESURETOUSEONE
HEAVYENOUGHTOCARRYTHECURRENTYOURPRODUCTWILL
DRAW!WIREGAUGESIZE!7' OFATLEASTIS
RECOMMENDEDFORANEXTENSIONCORDFEETORLESS
INLENGTH!CORDEXCEEDINGFEETISNOTRECOM
MENDED)FINDOUBTUSETHENEXTHEAVIERGAUGE
4HESMALLERTHEGAUGENUMBERTHEHEAVIERTHE
CORD!NUNDERSIZEDCORDWILLCAUSEADROPINLINEVOLT
AGERESULTINGINLOSSOFPOWERANDOVERHEATING

„

7!2.).'4HISPRODUCTCONTAINSONEORMORECHEMICALS
KNOWNTOTHE3TATEOF#ALIFORNIATOCAUSECANCERANDBIRTH
DEFECTSOROTHERREPRODUCTIVEHARM
7ASHHANDSAFTERHANDLING

5

SPECIFIC SAFETY RULES

WORK AREA

Keep the work area clean and well lighted. 

Cluttered 

benches and dark areas increase the risks of electric 
shock, fire, and injury to persons.

PERSONAL SAFETY

Avoid unintentional starting. Be sure the switch is off 
before connecting to the air supply.

 Do not carry the 

tool with your finger on the switch or connect the tool to 
the air supply with the switch on.

Remove adjusting keys and wrenches before turning 
the tool on. 

A wrench or a key that is left attached to 

a rotating part of the tool increases the risk of personal 
injury.

Always wear hearing protection when using the tool.

Prolonged exposure to high intensity noise is able to 
cause hearing loss.

TOOL USE AND CARE

Use clamps or another practical way to secure and 
support the workpiece to a stable platform. 

Holding 

the work by hand or against the body is unstable and is 
able to lead to loss of control.

Do not force the tool.

 Use the correct tool for the 

application. The correct tool will do the job better and 
safer at the rate for which the tool is designed.

Do not use the tool if the switch does not turn the 
tool on or off.

 Any tool that cannot be controlled with the 

switch is dangerous and must be repaired.

Disconnect the tool from the air source before 
making any adjustments, changing accessories, 
or storing the tool. 

Such preventive safety measures 

reduce the risk of starting the tool unintentionally.

Use only accessories that are identified by the 
manufacturer for the specific tool model. 

Use of an 

accessory not intended for use with the specific tool 
model, increases the risk of injury to persons.

AIR SOURCE

Never connect to an air source that is capable of 
exceeding 200 psi.

 Over pressurizing the tool is able to 

result in bursting, abnormal operation, breakage of the 
tool or serious injury to persons. Use only clean, dry, 
regulated compressed air at the rated pressure or within 
the rated pressure range as marked on the tool. Always 
verify prior to using the tool that the air source has been 
adjusted to the rated air pressure or within the rated air-
pressure range.

Never use oxygen, carbon dioxide, combustible gases 
or any bottled gas as an air source for the tool.

  Such 

gases are capable of explosion and serious injury to persons.

Save these instructions. 

Refer to them frequently 

and use them to instruct others who may use this air 
compressor and air tools. If you loan someone this tool, 
loan them these instructions also.

   WARNING:

When using tools, basic precautions should always be 
followed, including the following.