Tank has sufficient pressure.
No electrical power.
Blown shop/home fuse
Tripped shop/home breaker
Thermal overload open
Loss of power or overheating
Pressure switch is bad
Compressor will turn on when tank
pressure drops to cut-in pressure
Check to be sure unit is plugged in.
Replace shop/home fuse.
Reset shop/home breaker, determine
why problem happened.
Motor will restart when cool
Check for proper use of extension cord
Replace pressure switch
Tank has sufficient pressure.
No electrical power.
Blown shop/house fuse.
Tripped shop/home breaker.
Thermal overload open.
Loss of power or overheating.
Pressure switch is bad.
Compressor will turn on when tank
pressure drops to cut-in pressure.
Check to be sure unit is plugged in.
Replace shop/house fuse.
Reset shop/home breaker, determine
why problem happened.
First unplugged the compressor and
wait until it becomes cool. After that
compressor can be used
Check for proper use of extension cord.
Replace pressure switch.
Summary of Contents for Trim-Plus H1503TP-R
