Spool Pins
Your machine has two spool pins, a main spool pin and an
auxiliary spool pin. The spool pins are designed for all types
of thread. The main spool pin is adjustable and can be used
both in a horizontal position (the thread reels off the spool)
and a vertical position (the thread spool rotates). Use the
horizontal position for normal threads and the vertical
position for large spools or specialty threads.
Horizontal Position
Place a felt pad and the thread spool on the spool pin. Make
sure that the thread reels off from the front of the spool (A)
and slide on a spool cap.
Note: Not all thread spools are manufactured in the same way. If you
experience problems with the thread, turn the spool so that the thread
reels off in the opposite direction or place the thread in the vertical
position.
Depending on the size of thread spool, reverse the direction
of the spool cap (B).
Use the small cap when you use cross wound thread (C).
Set the thread net over the spool if thread reels off too easily
(D).
Vertical Position
Raise the spool pin to the vertical position. Place a felt pad
under the thread spool. This is to prevent the thread from
reeling off too fast. Do not place a spool cap on top of the
spool pin as that would prevent the spool from rotating.
Auxiliary Spool Pin
The auxiliary spool pin is used when winding a bobbin
thread from a second spool of thread or for a second spool
when sewing with a twin needle. Insert the auxiliary spool pin
into the hole at the top of the machine (A). Place a felt pad
under the thread spool.
2 Preparations
15
Summary of Contents for Designer Jade 35
Page 1: ...User s Guide KEEPING THE WORLD SEWING ...
Page 82: ......
