10:4
The Machine skips stitches
Did you insert the needle properly?
Insert needle correctly as described in chapter 2.
Did you insert a wrong needle?
Use needle system 130/705 H.
Is the needle bent or blunt?
Insert a new needle.
Did you thread the machine properly?
Check how the machine is threaded. If needed rethread the machine.
Is the correct presser foot used?
Attach correct presser foot.
Is the needle too small for the thread?
Change the needle.
Is the fabric moving up and down with
the needle when Free Motion sewing or
embroidering?
Attach Sensor Q-foot.
The seam has uneven stitches
Is the thread tension correct?
Check needle thread tension and the threading.
Are you using too thick or slubbed thread?
Change the thread.
Is the bobbin thread evenly wound?
Check bobbin winding.
Is a correct needle used?
Insert a proper needle correctly as described in chapter 2.
The Machine does not feed or feeds irregularly
Did you thread the machine properly?
Check how the machine is threaded.
If needed rethread the machine.
Has sewing lint collected between the feed teeth?
Remove the needle plate and clean the feed teeth with a brush.
Free Motion setting is on?
Turn off Free Motion setting in Sewing Mode.
Thread loops are forming on the underside of the embroidery design
Has the embroidery built up too much to
move freely under the presser foot?
Attach Sensor Q-foot.
If using the R-foot, increase the presser foot height in Machine Settings in
SET menu in small steps until problem is solved.
The embroidery design is distorted
Is the fabric hooped properly?
The fabric must be tightly hooped.
Is the inner embroidery hoop completely inserted
in the outer embroidery hoop?
Hoop the fabric in such a way that the inner hoop exactly matches the outer hoop.
Is the area around the embroidery arm free? Clear area around the embroidery unit.
The embroidery design has puckered
Did you stabilize your fabric sufficiently?
Ensure you use the proper stabilizer for your technique or fabric type.
The Machine will not embroider
Is the embroidery unit attached?
Make sure that the embroidery unit is properly attached into the socket.
Is the wrong hoop attached?
Slide on the correct hoop.
non-original parts and accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.
Summary of Contents for Designer Ruby Deluxe
