Get ting Ready to Sew – 7
UNPACKING
1. Place the machine on a sturdy,
Á
at surface, remove the packaging and lift off the cover.
2. Remove the packing material and the foot control.
3. The machine is delivered with an accessory bag, a power cord and a foot control cord.
4. Wipe the machine, particularly around the needle and stitch plate to remove any soil before sewing.
PACKING AWAY AFTER SEWING
1. Press the ON/OFF switch to OFF.
2. Unplug the cord from the wall socket and then from the machine.
3. Unplug the foot control cord from the machine. Wind the foot control cord inside the space on the underside of
the foot control.
4. Check to ensure that all accessories are in the accessory box. Slide the box on to the machine, behind the free arm.
5. Place the foot control in the space above the free arm.
6. Put on the cover.
ACCESSORY BOX
There are special places for presser feet and bobbins in the
accessory box, plus space for needles and other accessories.
Store the accessories in the box so they are easily accessible.
EXTENDED SEWING SURFACE
The space at the right side of the needle, between the
needle and the arm, gives you a great deal of extra space.
This makes sewing large projects and quilts much easier
than on other sewing machines. Keep the accessory box on
the machine to provide a large,
Á
at work surface.
USING THE FREE ARM
Slide the accessory box to the left when you wish to remove
it and use the free arm.
Use the free arm to facilitate sewing trouser legs and sleeve
hems.
To replace the accessory box, slide it onto the machine until
it
À
ts in place.
