point. With correct balance, the risk of hitting stones if
you release the handlebar is decreased.
For grass clearing, the product is correctly balanced
when the blade is at cutting height near the ground.
To start the engine
WARNING:
Keep a minimum distance
of 15 m/50 ft from persons or animals when
you start the product. There is a risk that the
cutting attachment starts to move.
1. Set the stop switch in the start position.
2. Set the choke control in the choke position.
3. Push the air purge bulb until the bulb starts to fill with
fuel.
Note:
It is not necessary to fill the air purge bulb
fully.
4. Hold the body of the product on the ground with your
left hand. Do not put your feet on the product.
5. Pull the starter rope handle slowly until you feel
some resistance, then pull the starter rope handle
with force.
WARNING:
Do not wind the starter
rope around your hand.
6. Continue to pull the starter rope handle until the
engine starts.
CAUTION:
Do not pull the starter
rope to full extension and do not let go
of the starter rope handle. Release the
starter rope slowly to prevent damage to
the product.
7. When the engine starts, put the choke control in the
run position and apply full throttle. The throttle trigger
automatically disengages from the start position.
8. Make sure that the engine operates smoothly.
WARNING:
Do not use the product
with a damaged spark plug cap to prevent
electrical shock.
16
975 - 005 - 14.11.2022
