20 – English
TECHNICAL DATA
Technical data
Note 1 Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
Technical data
226HD60S
226HD75S
Engine
Cylinder displacement, cm
3
23,6
23,6
Cylinder bore, mm
34,0
34,0
Stroke, mm
26
26
Idle speed, rpm
3000
±
200
3000
±
200
Max. engine output, acc. to ISO 8893
0,85/8500
0,85/8500
Catalytic converter muffler
No
No
Speed-regulated ignition system
Yes
Yes
Ignition system
Spark plug
NGK CMR7H-10
NGK CMR7H-10
Electrode gap, mm
0,9-1,0
0,9-1,0
Fuel and lubrication system
Manufacturer/type of carburettor
Walbro, Diaphragm Walbro, Diaphragm
Fuel tank capacity, litre
0,47
0,47
Weight
Weight without fuel and grease, kg
5,8
6,0
Noise emissions
(see note 1)
Sound power level, measured dB (A)
100
100
Sound power level, guaranteed L
WA
dB (A)
102
102
Sound levels
(see note 2)
Equivalent sound pressure level at the operator’s ear,
measured according to EN ISO 10517, dB(A):
91
91
Vibration levels
(see note 3)
Equivalent vibration levels (a
hv,eq
) at handles,
measured according to EN ISO 10517, m/s
2
Front/rear handles:
2,0/2,1<2,5
3,6/5,4
Blades
Type
Double sided
Double sided
Length, mm
600
750
Pitch, mm
35
35
Gear ratio
5.11
5.11
H1158461-38,226HD60S 75S_1.fm Page 20 Thursday, August 25, 2016 10:25 AM
